Savotta Jäger M Backpack

Very versatile high quality pack matching traditional and modern elements. Made in Finland. 

Read moreShow less
€229.95 (tax incl.)
  • Black
  • Olive
In Stock
Add to compare0
Add to wishlist(1)

The Jaeger backpack is an improved model of the Light Border Patrol backpack originally designed for the Finnish Border Guard. Genuine user experiences have been taken into account in the design of the backpack and the best of the many ideas have been sewn together to make the Jaeger. The Jaeger is more than a normal daypack. The many details and extensive MOLLE webbing make the backpack a truly modular and versatile tool. Due to its slim shape, the backpack will not be in the way even in cramped spaces and is ideal for skiing and hunting. In its size category, the Jaeger is a sturdy backpack to carry. The internal support frame holds the Jaeger firmly in shape. With the compression straps of the bag, even a pack that is not full can be tightened so that it sits firmly and does not jiggle around.


The actual bag of the Jaeger backpack (dimensions approximately 52 x 25 x 17 cm) has been designed to be slim but still spacious enough to hold the necessary supplies for a day trip. The opening of the bag is closed with a drawstring and secured with a waterproof protective collar which enables overpacking as well. The opening is covered with a flap which hugs the top of the backpack and is secured with straps. The flap has been attached with adjustable straps from both sides, so it “floats” and enables easy overpacking. If necessary, the generous length of the straps provides a lot of space under the flap for extra supplies, such as a sleeping bag. Furthermore, there is a spacious zippered pocket for valuables inside the flap (dimensions approximately 25 x 25 cm).

The contents of the backpack can be accessed quickly also from its right side through a vertical zipper that runs along the full height of the backpack. The zipper has two pullers so it can be opened from your preferred spot.

Against the back inside the bag, there is a compartment the size of the whole back for the support frame of the backpack. The compartment is also ideal as an additional pocket to carry flat items.

Inside the bag, there is a mesh pocket (dimensions approx. 23 x 37 cm) for a hydration bladder or supplies that need to be kept separate. This pocket will easily hold, for example, a contemporary 13.3-inch laptop or any smaller pads and gadgets.

On each side of the bag protected under a flap there are outlets for the tubes of a hydration bladder or, for example, a cord or aerial.

With the four compression straps on the sides of the backpack, the bag can be tightened compactly even if it is not full.

Low on the sides there are open pockets with elasticised openings where you can place small supplies or, alternatively, a long tool or a water bottle, the neck of which can be tied firmly in place with a side compression strap.

The bottoms of these pockets also have metal rings to remove water from the pocket.

PALS webbing

Jaeger would not be Jaeger without the modular structure provided by PALS webbing familiarly known as “MOLLE”.

PALS/MOLLE is an attachment system used by the military in almost every country. This attachment system has been created for conditions requiring unconditional modularity and durability.

The very Finnish-sounding MOLLE is an acronym for: Modular Lightweight Load-carrying Equipment. PALS, on the other hand, stands for: Pouch Attachment Ladder System.

By applying this technology, the Jaeger backpack has been made into a cutting edge modular package. MOLLE webbing can be found on the front, sides, flap and even the shoulder straps and hip belt of the Jaeger. With MOLLE, you can attach any pocket compatible with PALS almost anywhere you want on the Jaeger. By means of suitable pockets, the Jaeger backpack can be expanded into, for example, a compact anatomical rucksack.

In addition to the modular attachment possibilities, the MOLLE webbing reinforces and stabilises the backpack. One MOLLE loop on the Jaeger backpack can bear over 100 kg of weight.

Other attachment points

The attachment straps of the flap are long and run along the whole front of the backpack and under it. If necessary, a 25 mm strap dives nicely along the MOLLE webbing and can be lifted to the surface wherever desired. This enables the tying of supplies securely on the front of the backpack without additional detachable straps. The bottom of the backpack has four guide loops for straps which enable the tying of equipment to the bottom of the backpack as well. Tying to the bottom is an excellent carrying method for rolled sleeping mats, for example.

On the front side of the Jaeger at the bottom of the bag you can find attachment loops (2 pcs) for the transport of loose equipment. The loops have been sized to be long enough to suit the carrying of exceptionally long pieces of equipment so that the shaft fits into the loop, if necessary.

It is also possible to fasten items that would not otherwise fit in the backpack behind the side compression straps of the bag. The compression straps have been sized to be long enough to extend over the backpack all the way to the opposite attachment point, if necessary.

Carrying system

The anatomically shaped, sturdy shoulder straps and the low-profile but robust hip belt make for supported and comfortable carrying. The buckle of the hip belt can be tightened in both directions and there is a lot room for adjustment to suit users of many sizes. The buckled chest strap provides extra comfort and support for carrying. With the carrying handle on the top, the backpack can be carried easily by hand as well.

The back has been reinforced with a highly durable frame made of ethylene plastic sheet. Because of this lightweight frame, the backpack stays upright and is comfortable to carry even with a load that is a bit heavier. The support frame can also be removed from the backpack, if desired. As an optional extra, a more rigid version of the frame is available for the Jaeger backpack in which two vertical aluminium rods have been attached to ethylene sheet with rivets to stiffen it. A Jaeger backpack equipped with the extra frame is already a small ergonomic rucksack.

The generously sized and sturdy padding pillows against the back are a rarity in a backpack of this size category and make the Jaeger a surprisingly comfortable small backpack to carry. If desired, the pillow against the small of your back can be removed or, alternatively, the hip belt can be folded out of the way behind the pillow.

Technical specifications

External dimensions: height 52 cm, width 25 cm, depth 18 cm.
Bag capacity when the backpack is closed: approximately 24 L.
Overpacking capacity with protective pouch: approx. +6 L.
Capacity of the top pocket: approx. 2 L.
Weight: approximately 1.75 kg.
Materials: 1000D Cordura, Delrin special plastic buckles and 8 mm coil zippers.
Frame: Ethylene plastic sheet.
Colour: olive green.

Warranty and guarantee

The product has a 5-year guarantee against material and manufacturing defects.

Made in Finland

Our comment

The Jaeger truly is a fantastic backpack which continued to surprise us in our tests. Thanks to the used materials and the high quality production in Finland the pack is indestructible. Thanks to the Molle-System and the various thought-through additional options the backpack is very versatile. It is quite surprising how much gear you can fit into a backpack of that size when it is well designed. The amount of gear that you can fit into the Jaeger is really surprising. this allows it to be not only suitable as a daypack for dayhikes but can also be used for overnighters. The design and the optics make it a nice Bushcraft pack.

Read moreShow less
Product Details
Customers who bought this product also bought:
Beeswax Beeswax
€7.99 (tax incl.)
100% pure and natural beeswax without paraffine or any other additives. Perfect to wax your clothing & other gear



Create a free account to use wishlists.

Sign in